04-23-2014 10:57 AM
Dear All,
Please help me on this. I have a cisco ASA 5510 with base license and I want to configure on this product as below:
1. Interface e0/0 (outside)
2. Interface e0/1 (inside)
3. Interface e0/2 ( connect to branch with DPLC or local loop vpn connection)
The question is, Can I configure point to point vpn connection from HQ to Branch over DPLC or local loop connection?
Please kindly to check the diagram as in attachment file.
Please help!
Thanks and Best regard,
Sokmeng
Solved! Go to Solution.
04-24-2014 02:16 AM
There are some limitation in 5505 and you need correct licensing to make it to work. Please refer to this document for more information:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa80/configuration/guide/conf_gd/int5505.pdf
Vishnu
04-23-2014 05:46 PM
Yes you can make VPN to work on the third interface. The only thing that you need to make sure about is the routing. If routing is correct then this is not a complex setup.
Vishnu
04-23-2014 06:31 PM
Vishnsha, yes, you said right
syed
04-24-2014 01:04 AM
Thanks you for your reply. So mean that I no need to enable one more wan on asa 5510 for DPLC connection right? and what about cisco asa 5505 for my branch, it comes with base license also, does it can do like cisco asa 5510?
Thanks and Best regard,
Sokmeng
04-24-2014 02:16 AM
There are some limitation in 5505 and you need correct licensing to make it to work. Please refer to this document for more information:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa80/configuration/guide/conf_gd/int5505.pdf
Vishnu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide