I have an environment with multiple remote offices connecting to the an ASA at the core. Currently we create seperate IPSec tunnels to each subnet that the remote office needs to connect to. We would like to enable dynamic routing to allow access to all the networks through one tunnel. The SOHO routers at the remote sites will support RIP V1 and V2. Can I enable RIP in my ASAs in a way that will propogate only the routes coming through the VPN tunnels? I can then redistribute them through EIGRP in my core routers.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...