Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

easy vpn server and remote

i have some problem i was configure

easy vpn server and remote

everythink is ok connection is idle

but i cant ping server from client

show crypto ipsec sa in the vpn server

shows packet decrypt but not encrypt

i use split tunnelig an rri

static router was entered in the vpn server and sh ip route shows whis route

it's config server

crypto isakmp client configuration group test

key cisco123

pool ippool

acl 106

crypto dynamic-map dynmap 10

set transform-set myset

reverse-route

crypto map test client authentication list userauthen

crypto map test isakmp authorization list groupauthor

crypto map test client configuration address initiate

crypto map test client configuration address respond

crypto map test 10 ipsec-isakmp dynamic dynmap

it's client config

crypto ipsec client ezvpn gprs

connect auto

group test key cisco123

mode network-extension

peer x.x.x.x

xauth userid mode local

1 REPLY
Silver

Re: easy vpn server and remote

The problem is seems like that "The pushed address is not assigned" fails in the

ipsec_ezvpn test.

For the further details follow the bug CSCek39336

113
Views
0
Helpful
1
Replies