Is it possible to configure easy vpn server feature without split tunneling so my known remote clients can connect on my (only) local subnet?
Suppose we have a clean configuration with a local dhcp pool configured on 192.168.1.0 network , clients with internet access, no access lists and easy vpn feature. When a remote machine enters my network I created a pool “ip local pool <name> 192.168.1.3” and so the remote client takes this ip… and only that. It has no other access to and from any machine on the network.
I have no problem when i configure ip local pool on different network (for example 192.168.2.2). For security reasons and for trying to keep configuration as less as possible I don’t want to use any other subnet. I have a router cisco 887
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...