Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

EASY VPN

Hai,

one of my customer is having an easy vpn setup, in which his router is acting as a Easy VPN server and 2 branch routers are connected to it as a easy vpn client.

Now, i need to change the customer EASY VPN Server router  and all the vpn should terminate in firewall. Please guide!!!

1 REPLY
VIP Green

Re: EASY VPN

Hi, The following is an example of how you can configure EazyVPN on an ASA5500 
firewall that is running verison 9.0 or higher.  This link is for EazyVPN
configuration between ASA version 7.x and a cisco 871. There might be some
differences in the configuration from the 9.0 but for the most part it should
be correct.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_

example09186a0080809222.shtml

object network HQ-LAN
subnet

object network SPOKE-LAN
subnet  

nat (inside,outside) source static HQ-LAN HQ-LAN destination static SPOKE-LAN
SPOKE-LAN


crypto ikev1 policy 1
authentication pre-share
hash sha
encryption aes
group 2

crypto ipsec ikev1 transform-set mySET esp-des esp-md5-hmac
crypto dynamic-map myDYN-MAP 5 set ikev1 transform-set mySET
crypto map myMAP 60 ipsec-isakmp dynamic myDYN-MAP
crypto map myMAP interface outside


group-policy myGROUP internal
split-tunnel-policy tunnelall
tunnel-group DefaultRAGroup general-attributes 
default-group-policy myGROUP 

tunnel-group DefaultRAGroup ipsec-attributes 
pre-shared-key

--

Please rate all helpful posts.

--

Please remember to rate and select a correct answer
121
Views
0
Helpful
1
Replies
CreatePlease to create content