cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
294
Views
1
Helpful
1
Replies

EasyVPN between PIX and Concentrator

colomacrespi
Level 1
Level 1

Hi to all,

I?m trying to set an EasyVPN connection between a PIX Firewall and a Concentrator 3000.

Some details about the configuration:

-I?m using client extension mode for the EasyVPN connection.

-PIX private interface network is: 10.0.10.0/24

-PIX public interface uses DHCP.

-Concentrator?s public IP is 194.179.70.9

-The user created on the Concentrator to get the connection from the EasyVPN Client is PIXPlug&Play.

I manage to establish the tunnel. I also manage to trasmit traffic from the PIX to the concentrator. But I never get a response.

I have check routes after the concentrator in our LAN for the network 10.0.10.0, and they are ok (10.0.10.0 255.255.255.0 172.19.128.206(concentrator private IP)).

I attach the PIX and Concentrator?s configurations and logs.

Dear colleagues, I?m hopeless about this... Any idea will be wellcome...

Thanks in advance,

Coloma Cresp?

1 Reply 1

b.hsu
Level 5
Level 5

There is no attachment related to configuration in the post.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: