Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

EasyVPN between PIX and Concentrator

Hi to all,

I?m trying to set an EasyVPN connection between a PIX Firewall and a Concentrator 3000.

Some details about the configuration:

-I?m using client extension mode for the EasyVPN connection.

-PIX private interface network is: 10.0.10.0/24

-PIX public interface uses DHCP.

-Concentrator?s public IP is 194.179.70.9

-The user created on the Concentrator to get the connection from the EasyVPN Client is PIXPlug&Play.

I manage to establish the tunnel. I also manage to trasmit traffic from the PIX to the concentrator. But I never get a response.

I have check routes after the concentrator in our LAN for the network 10.0.10.0, and they are ok (10.0.10.0 255.255.255.0 172.19.128.206(concentrator private IP)).

I attach the PIX and Concentrator?s configurations and logs.

Dear colleagues, I?m hopeless about this... Any idea will be wellcome...

Thanks in advance,

Coloma Cresp?

1 REPLY
Silver

Re: EasyVPN between PIX and Concentrator

There is no attachment related to configuration in the post.

194
Views
1
Helpful
1
Replies
CreatePlease to create content