07-26-2012 02:49 PM - edited 02-21-2020 06:13 PM
I'm getting the 'AnyConnect is not enabled on the VPN server' error when trying to connect. I assume it's because I never loaded the AnyConnect image on the ASA.
The Cisco docs state to download it on their website after logging in, but I can't seem to find it anywhere.... Can someone point me in the right direction?
Solved! Go to Solution.
07-26-2012 02:51 PM
Its not in the ASA software area, if you go to www.cisco.com/go/anyconnect, there is download software link. You will select the *pkg file based the devices.
Tarik Admani
*Please rate helpful posts*
07-26-2012 02:58 PM
Hi,
Please go to http://tools.cisco.com/squish/D9CBd and select:
Web deployment package for Windows platforms.
anyconnect-win-3.0.08057-k9.pkg
Let me know if you run into any issues.
Thanks in advance.
Please rate this post if you find it useful.
07-26-2012 02:51 PM
Its not in the ASA software area, if you go to www.cisco.com/go/anyconnect, there is download software link. You will select the *pkg file based the devices.
Tarik Admani
*Please rate helpful posts*
07-26-2012 02:58 PM
Hi,
Please go to http://tools.cisco.com/squish/D9CBd and select:
Web deployment package for Windows platforms.
anyconnect-win-3.0.08057-k9.pkg
Let me know if you run into any issues.
Thanks in advance.
Please rate this post if you find it useful.
07-26-2012 03:42 PM
I have a Mac, so I grabbed the file, uploaded it via tftp and ran:
vpn(config-webvpn)# svc image flash:/anyconnect-macosx-i386-3.0.08057-k9.pkg
However, when I go to http://myVPN.hostname, it asks me to log in and afterwards, I'm expecting it to ask me to install the Mac client, but it gives me this portal instead:
Thanks!
07-26-2012 08:54 PM
I think you have to go into the portal customization in ASDM and enable the "AnyConnect" tab. I can grab a screen shot tomorrrow if you need more help. There's probably a way to do it in the CLI but I don't know how off the top of my head.
07-26-2012 10:24 PM
Here is some good reference material on how to configure anyconnect connections:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_anyconnect.html#wp1074591
Thanks,
Tarik Admani
*Please rate helpful posts*
07-26-2012 10:28 PM
Hi Tarik,
Good link to share, you get 5
07-26-2012 10:35 PM
Hi Greg,
Nice post and I agree with you about the Customization option.
07-26-2012 10:34 PM
Please make sure you have the SSL client protocol (AnyConnect) enable in the group-policy.
Also and as mentioned previously by Greg, make sure you have it enabled on the customization file.
Additional steps:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_anyconnect.html#wp1090443
Let us know.
Please rate any post that you find useful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide