Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Enabling AnyConnect on ASA

I'm getting the 'AnyConnect is not enabled on the VPN server' error when trying to connect.   I assume it's because I never loaded the AnyConnect image on the ASA.

The Cisco docs state to download it on their website after logging in, but I can't seem to find it anywhere.... Can someone point me in the right direction?

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions

Enabling AnyConnect on ASA

Its not in the ASA software area, if you go to www.cisco.com/go/anyconnect, there is download software link. You will select the *pkg file based the devices.

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*

Enabling AnyConnect on ASA

Hi,

Please go to http://tools.cisco.com/squish/D9CBd and select:

Web deployment package for Windows platforms.

anyconnect-win-3.0.08057-k9.pkg

Let me know if you run into any issues.

Thanks in advance.

Please rate this post if you find it useful.

8 REPLIES

Enabling AnyConnect on ASA

Its not in the ASA software area, if you go to www.cisco.com/go/anyconnect, there is download software link. You will select the *pkg file based the devices.

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*

Enabling AnyConnect on ASA

Hi,

Please go to http://tools.cisco.com/squish/D9CBd and select:

Web deployment package for Windows platforms.

anyconnect-win-3.0.08057-k9.pkg

Let me know if you run into any issues.

Thanks in advance.

Please rate this post if you find it useful.

New Member

Enabling AnyConnect on ASA

I have a Mac, so I grabbed the file, uploaded it via tftp and ran:

vpn(config-webvpn)# svc image flash:/anyconnect-macosx-i386-3.0.08057-k9.pkg

However, when I go to http://myVPN.hostname, it asks me to log in and afterwards, I'm expecting it to ask me to install the Mac client, but it gives me this portal instead:

http://i.imgur.com/TbbKX.png

Thanks!

New Member

Enabling AnyConnect on ASA

I think you have to go into the portal customization in ASDM and enable the "AnyConnect" tab.  I can grab a screen shot tomorrrow if you need more help.  There's probably a way to do it in the CLI but I don't know how off the top of my head.

Enabling AnyConnect on ASA

Here is some good reference material on how to configure anyconnect connections:

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_anyconnect.html#wp1074591

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*

Re: Enabling AnyConnect on ASA

Hi Tarik,

Good link to share, you get 5

Re: Enabling AnyConnect on ASA

Hi Greg,

Nice post and I agree with you about the Customization option.

Enabling AnyConnect on ASA

Please make sure you have the SSL client protocol (AnyConnect) enable in the group-policy.

Also and as mentioned previously by Greg, make sure you have it enabled on the customization file.

Additional steps:

Prompting Remote Users

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_anyconnect.html#wp1090443

Let us know.

Please rate any post that you find useful.

1895
Views
10
Helpful
8
Replies
CreatePlease to create content