Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Error 442 cisco vpn client 5.0.07.0440 in Windows XP 64 bits SP2

Hi there,

I am wondering if anybody has any experience running cisco VPN client over Windows XP SP 2 64 bits.

I get the error 442 Failed to enable the virtual adapter. I have seen a number of solutions, but can not find solutions or workarounds for Windows XP 64 bits.

Thank you

Martin

2 REPLIES

Error 442 cisco vpn client 5.0.07.0440 in Windows XP 64 bits SP2

We are have the exact same problem and can't find a fix. Its a fresh install of Windows XP (64bit) on a Dell Latitude M4500.

Any help most appreciated.

Regards,

Rob

New Member

Error 442 cisco vpn client 5.0.07.0440 in Windows XP 64 bits SP2

We're having the same problem as well. Here is the output of the Log:

1      15:35:38.821  11/08/11  Sev=Warning/2          CVPND/0xE340002C

Unable to enable the 64-bit VA after timeout

2      15:35:38.821  11/08/11  Sev=Warning/3          CVPND/0xE3400029

The Client failed to enable the Virtual Adapter on 64-bit Windows

3      15:35:38.821  11/08/11  Sev=Warning/2          CM/0xE310000A

The virtual adapter failed to enable

4      15:35:38.867  11/08/11  Sev=Warning/2          IKE/0xE300009B

Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)

5      15:35:38.867  11/08/11  Sev=Warning/2          IKE/0xE30000A7

Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)

Machine makes it through IKE Phase 2 on the ASA it's VPN'ing into.

3083
Views
0
Helpful
2
Replies
CreatePlease to create content