Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Error tunneling to ASA 5505 using "Software VPN Client"

Here's my current network:

vpn-client-diagram-2.fw.png

I'm trying to VPN tunnel into the ASA using the Cisco VPN Client software.

Here's my config ASA config: http://pastebin.com/raw.php?i=ad6p1Zac

Here's my VPN Client Connection entry details:

http://puu.sh/6emhY.png

http://puu.sh/6emdb.png

(Password: cisco)

http://puu.sh/6emeU.png

http://puu.sh/6emfv.png

http://puu.sh/6emgm.png

When I try to connect, I get the error message "The received HASH payload cannot be verified".

http://puu.sh/6emqo.png

What does this error mean and how can I resolve it?

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Error tunneling to ASA 5505 using "Software VPN Client"

I believe you should enter this information in the group authentiation fields:

(Just below "Group Authentication")

Name: vpnclientgroup

Password: [whatever you have entered as a pre-shared-key below]

tunnel-group vpnclientgroup ipsec-attributes
 pre-shared-key *****

After tunnel establishmet you will get a password pop-up, there you enter "David" and the associated password.

3 REPLIES
Bronze

Error tunneling to ASA 5505 using "Software VPN Client"

I believe you should enter this information in the group authentiation fields:

(Just below "Group Authentication")

Name: vpnclientgroup

Password: [whatever you have entered as a pre-shared-key below]

tunnel-group vpnclientgroup ipsec-attributes
 pre-shared-key *****

After tunnel establishmet you will get a password pop-up, there you enter "David" and the associated password.

Community Member

Error tunneling to ASA 5505 using "Software VPN Client"

Thank you, thank did it!

Bronze

Error tunneling to ASA 5505 using "Software VPN Client"

You are welcome, and thank you for rating!

Some people forget to rate helpful answers...

131
Views
0
Helpful
3
Replies
CreatePlease to create content