Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Evaluation license for cisco 1921 sslvpn problem

Hello,

I am trying to evaluate the IPSEC functionality of a Cisco 1921.

The image version installed is Universal/k9:

Router#show ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)

As far as I understood from

http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/software-activation-on-integrated-services-routers-isr/white_paper_c11_556985.html

I get the two evaluation license from http://www.cisco.com/go/license

- securityk9 license technology

- SSLVPN feature

In fact, it seems I have the licenses loaded:

Router#show license
Index 1 Feature: ipbasek9                       
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 2 Feature: securityk9                     
        Period left: 8  weeks 4  days
        Period Used: 0  minute  0  second  
        License Type: Evaluation
        License State: Active, Not in Use, EULA accepted
        License Count: Non-Counted
        License Priority: Low
...
Index 4 Feature: SSL_VPN                        
        Period left: 8  weeks 4  days
        Period Used: 0  minute  0  second  
        License Type: Evaluation
        License State: Active, Not in Use, EULA accepted
        License Count: 75/0/0  (Active/In-use/Violation)
        License Priority: Low
...

But as it seems, the securityk9 technology is not used, and I am still missing the "crypto isakmp" command.

Any idea what I am missing?

 

Everyone's tags (1)
1 REPLY
Highlighted
New Member

I reply myself.I was missing

I reply myself.

I was missing the activation of the security package. To enable that, from the configuration terminal:

# license boot module c1900 technology-package securityk9

Then reload the router.

BTW: the SSL_VPN doesn't have to do with IPSEC tunnels.

252
Views
0
Helpful
1
Replies
CreatePlease login to create content