am facing problem with EZVPN with nat-t my tunnel not coming up with the virtual IP and if configur it with the real ip it will work with same config kindly find the topology and the config file attached and the debug which is showin bellow from client router debug
client router debug
*Mar 1 01:00:44.915: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Mar 1 01:00:44.919: ISAKMP:(0): SA request profile is (NULL)
*Mar 1 01:00:44.919: ISAKMP: Created a peer struct for 126.96.36.199, peer port 500
*Mar 1 01:00:44.923: ISAKMP: New peer created peer = 0x65BFBE3C peer_handle = 0 x80000004
*Mar 1 01:00:44.923: ISAKMP: Locking peer struct 0x65BFBE3C, refcount 1 for isa kmp_initiator
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...