Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

EZVPN Client could not talk (ping ) to each other

I have one PIX 525 at central site configured with EZVPN Server, and two remote sites, each site uses PIX 501 and configured as EZVPN client and network- extension-mode, all the PCs and IP phone on the remote LANs could communicate with the Network at Central offic behind the PIX 525, but, the PC or IP phone at one remote office could not communicate with the PC or IP Phone at the other Remote office. Any work around or solutions. Thanks in advance

2 REPLIES

Re: EZVPN Client could not talk (ping ) to each other

Hi

Instead of going via the central office and reach the remote sites cant you create a straight forward ipsec tunnel between the remote sites so that they can communicate without going to the central site..

Any restrictions out there in getting this P2P config done between the remote sites ..

regds

New Member

Re: EZVPN Client could not talk (ping ) to each other

The both remote sites are Cable modem sites with dynamic IP addresses from ISP. another solution is DMVPN, but PIX 501 could not support it. Any more solutions?

Thanks

139
Views
0
Helpful
2
Replies
CreatePlease to create content