Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

EZVPN - IP POOL

Hi,

I configured ezvpn on router to provide connectivity to remote user. I defined pool range 172.16.100.1-20 and enable split tunneling. Remote site (from where users are dialing) is having two local networks there i.e. 192.168.1.0/24 (users network), 172.16.1.0/24 (server farm) Now i am facing problem when user connect vpn, he can ping central IPs and its192.168.1.0/24 network but unable to access 172.16.1.0/24 network there. when i see users PC routing table (route print) after connecting VPN, all traffic for 172.16.0.0 255.255.0.0 is going through VPN.

Central Site (10.x.x.x)---------------ezvpn (172.16.100.1-20)-------------------RemoteSite (users network 192.168.1.0/24, server network 172.16.1.0/24)

If i changes pool range from 172.16.100.1-20 (class B ) to 192.168.100.1-20 (class C), it start working fine

Any way to solve this issue..

Best Regards

1 REPLY
Cisco Employee

Re: EZVPN - IP POOL

Hello,

On the router, you cant set a network mask for the pool - unfortunately. So, it will use the default mask according to the pool range you have set.

Your analysis is correct. The option would be to change the pool to a different network.

Hope this helps.

Cheers,

Gilbert

131
Views
0
Helpful
1
Replies