Failed to enable Virtual Adapter in Windows 8

[xsnail963]

Hello

I got a problem when using Cisco VPN client 5.0.04.0300 in Windows 8...today

Error as following:

Reason 442: Failed to enable Virtual Adapter.

Logs here:

1      20:48:21.787  03/01/12  Sev=Warning/3         CVPND/0xE340000C

The Client was unable to enable the Virtual Adapter because it could not open the device.

2      20:48:21.807  03/01/12  Sev=Warning/3         CVPND/0xE340000C

The Client was unable to enable the Virtual Adapter because it could not open the device.

3      20:48:21.807  03/01/12  Sev=Warning/2         IKE/0xE300009B

Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)

4      20:48:21.807  03/01/12  Sev=Warning/2         IKE/0xE30000A7

Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)

I'm using a laptop which belongs to the company...this is really urgent.

Can anybody help me!!?

Really appreciate any feedback!!!

Snail

[Jason Gervia]

I'd reach out to your account team and see if there is an alpha or beta vpn client available that works with Windows 8.  There doesn't seem to be a publicly available one on CCO currently.

--Jason

[xsnail963]

thank you so much for your reply.

I'm considering to restore to Windows 7 cuz I use those apps very offen..

thanks again...

[Jason Gervia]

Only other thing you can try is anyconnect - if you have SSL enabled on your ASA it might have better luck with windows 8.

[xsnail963]

thank you! Jason!