FlexVPN Spoke-to-Spoke Routing Override Loop

[lupingyao]

I have a Spoke Router, this Router hat a Routing to inside192.168.1.0 255.255.255.0 next hop is 10.1.1.1(10.1.1.0/29 is the tranfer network):

ip route 192.168.1.0 255.255.255.0 10.1.1.1

After active the FlexVPN i get the Routing override, then the routing is 192.168.1.0 255.255.255.0 tunnel0 in the Soke-Router. I lost the right routing, and i get the loop from Center to 192.168.1.0.

How can i let the Spoke Router to ignore the Routing from himself from Center?

[Marcin Latosiewicz · Accepted solution]

One was would be to increase distance of routes received from hub. 

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/m1/sec-m1-cr-book/sec-cr-r2.html#wp1846954161

[lupingyao]

Thanks a lot!