Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM module cpu utilization is very high

my FWSM module:

Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz

cpu utilization is very high ctx1 is taking is around 60 %

0.3% 0.3% 0.3% admin

58.0% 58.1% 58.4% ctx1

2 REPLIES

Re: FWSM module cpu utilization is very high

Syslogs and Application Inspections are the most heavy processes on the FWSM.

Try lowering the sys log levels to 3/4 and removing the inspections that you do not need.

Syed Iftekhar Ahmed

New Member

Re: FWSM module cpu utilization is very high

We had already disabled the unwanted . Apart from this we had also tried disabling the syslog but still the CPU utilization is not going down

still no luck

Can you please provide me some clue on this

298
Views
0
Helpful
2
Replies
CreatePlease to create content