Has anyone managed to setup GETVPN on a CE router with VRF Lite?
I using 2821's (12(24)T4) in a test lab to test the functionality of GETVPN before I deploy on a production network. The GETVPN configurations works fine if the routing is in the global table but once the config is moved to a VRF the GM's will not register. The KS is only using the global routing table as it is not VRF aware.
The MPLS core and CE to KS connectivity is working fine. Does anyone have a working configuration?
Thanks for the speedy response to my question. I'm not neccessarily looking to split the data and control traffic but merely trying configure GETVPN on a VRF interface. I have CE routers which have multiple VRF's (Customer data, Management) and now internet and I want to encrypt the new internet vrf. I have followed the design guide and I'm using the recommended versions.
I will try ver 15 and see what functionality that gives me.
Do you have a working configuration that you can share?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...