Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Group lock does not work ?

Hello

Could you please help me.

i tested group lock feature againts cisco acs.

in my tests i had three groups that were configured in concentrator

group 1 with rights 1. (in concentrator configuration, ipsec-section, the group lock (GL) was first on and then off) user uses this group for group authentication.

group 2 witch rights 2 (in concentrator configuration, ipsec-section, the group lock ( GL) was off

group 3 with rights 3 (in concentrator configuration, ipsec-section, the group lock ( GL ) was on

Acs returned the new group to the concentrator via parameter class 25

now i am asking if the following is the default behaviour: If either of the group has group lock off, the group can be changed. In another words i thought that the group-authentication group(name) and group(name) provided by ACS must both be configured as group lock off, or else the group cannot be changed.

Test1

group 1 with GL on --> change to Group2 with GL off --> succeeded group change ??? wrong behaviour ?

test2

group 1 with GL on --> change to Group3 with GL on --> No group change--> OK

test3

Group 1 with GL off --> change to Group2 with GL off --> succeeded group change OK

test4

Group 2 with GL off --> change to Group3 with GL on --> succeeded group change ??? wrong behaviour ?

Any help will be appreciated

TIA

Best Regards,

Susanna

121
Views
0
Helpful
0
Replies
CreatePlease to create content