Anyone has ever configured the module on a 2811/series for hardware compression. So far it's only doing software compresion. The IOS version is 12.4(T) advance IP Services. Couple of commands from the configuration guide doesn't work. The IPPCP(LZS) compresion emphasizes on hardware encryption and software compresion. Any clue about the compression itself, and if possible a sample config. plz dn't paste the link of module's Datasheet:)
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...