Hello, I am new to site-site vpn and need help setting up one. I received this info from the remote site and when using asdm wizard it wont work. This information is not the real address. Any help would be great thanks, I currently deleted the connection. So I am starting fresh
Partners NAT address: 192.168.205.88
Vendor NAT Address: 10.255.98.14
Partners Access List:
Extended IP access list l2l01817
10 permit ip host 192.168.205.88 host 10.255.98.14
IKE Phase 1 (ISAKMP) Authentication: Pre-shared secret Encryption: 3DES Hash Algorithm: SHA Key Exchange: D-H Group 2
IKE Phase 2 (IPSEC) Protocol/Hash/Algorithm: ESP-3DES-SHA SA Lifetime: 86400 sec
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...