Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How can I import .pcf profile into Cisco AnyConnect?

Hi,

I need to import .pcf profile information into Cisco Anyconnect in order to run it under x64 laptop. We use to ru Cisco VPN Client, but it doens't run with x64 hardware. Can anybody help me in the configuration of cisco anyconnect in order to import an existing .pcf profile?

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How can I import .pcf profile into Cisco AnyConnect?

You can't directly import a legacy PCF file into AnyConnect.  The same concept is achieved using an AnyConnect XML profile.  You can read more about this at the links below.

http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect24/administration/guide/ac03features.html#wp1064149

https://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/svc.html#wp1072604

3 REPLIES

Re: How can I import .pcf profile into Cisco AnyConnect?

You can't directly import a legacy PCF file into AnyConnect.  The same concept is achieved using an AnyConnect XML profile.  You can read more about this at the links below.

http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect24/administration/guide/ac03features.html#wp1064149

https://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/svc.html#wp1072604

New Member

Re: How can I import .pcf profile into Cisco AnyConnect?

Dear Auritza,

open the anyconnect then click on connection entries then import then select the file.....that's all.

Regards,

How can I import .pcf profile into Cisco AnyConnect?

Mohammed,

That will not work on Cisco Anyconnect. There is no Connection entries menu. This is only present in the legacy Cisco VPN client software.

The PCF files from this Cisco VPN client cannot be directly used with the Anyconnect client. Todd's answer was correct.

167620
Views
16
Helpful
3
Replies