Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How do I inspect when I use site-tosite VPN?

I was implementing site-to-site VPN on the ISR router(SecurityIOS) and the ASA 5510 firewall.

what are protocol that I need to inspect on ISR router?

please advices or point me to useful links.

Thanks in advance

1 REPLY
Silver

Re: How do I inspect when I use site-tosite VPN?

Robust site-to-site VPN services are combined with rich inspection capabilities and quality of service (QoS) features, Using a Cisco ASA 5500 Series appliance and combining VPNs with QoS features and rich inspection capabilities

ARIS is protocol independent. In case of IP, ARIS messages are transmitted with IP protocol number 104.

http://www.cisco.com/en/US/netsol/ns340/ns394/ns171/ns125/networking_solutions_white_paper0900aecd80282f87.shtml

107
Views
0
Helpful
1
Replies
CreatePlease to create content