Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to assignment solid ip to vpn client

my cisco vpn client software connect to router.router is acted as vpn server.

how can i config router to assignment solid ip to client.i only know use ip local pool.but the client get ip dynamicly.

if router can do this or not !

thank you very much!

3 REPLIES
Silver

Re: how to assignment solid ip to vpn client

Check Configuration > System > Address Management > Assignment to verify that the correct address assignment method is selected.

If you have selected Dynamic Host Configuration Protocol (DHCP), verify that the VPN Concentrator can connect to the DHCP server.

If you have selected local address pool, verify that the address pool is configured on the VPN Concentrator.

If you have selected authentication server, verify that the authentication server is configured correctly. (The address can only be assigned with RADIUS.)

Gold

Re: how to assignment solid ip to vpn client

as far as i know, router is not capable to assign static ip for remote vpn client.

a workaround i can think of is to create multiple groups. each group has only one ip, and each remote user belongs to one group.

however, this would be complicated if number of remote users is huge.

New Member

Re: how to assignment solid ip to vpn client

thanks.

someone said that can use acs implement this function.

when client access server.it through radious certification.then the acs server allocate solid ip to the client according the username.

i think maybe this is a good way.

113
Views
0
Helpful
3
Replies
CreatePlease login to create content