Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to config pix 7.0 to permit pptp connection through pix.

i have pix 7.0 .there are pptp server and pptp client on the two side of pix

.i know pix 7.0 doesn't support pptp.but if it's also can't let pptp throughtout? how to config pix 7.0 to permit pptp connection through pix.

thank you very much.

1 REPLY
New Member

Re: how to config pix 7.0 to permit pptp connection through pix.

did you check this document:

http://www.cisco.com/warp/public/110/pix_pptp.html

take a look at the example. That should work for 7.0 as well

---------------

Commands to Add to All Versions

In this configuration example, the PPTP server is 209.165.201.5 (static to 10.48.66.106 inside), and the PPTP client is at 209.165.201.25.

access-list acl-out permit gre host 209.165.201.25 host 209.165.201.5

access-list acl-out permit tcp host 209.165.201.25 host 209.165.201.5 eq 1723

static (inside,outside) 209.165.201.5 10.48.66.106 netmask 255.255.255.255 0 0

access-group acl-out in interface outside

--------------

102
Views
0
Helpful
1
Replies
CreatePlease login to create content