Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to config vpn pool on asa5510 in a Multi-hop routing lan?

home----internet----asa5510(172.16.0.1/30)----(172.16.0.2/30)Internet behavior management(172.16.0.5/30)----(172.16.0.6/30)LAN(192.168.1.0/24)

I want to use 'remote access ipsec vpn' to connect LAN(192.168.1.0/24),but i don't konw how to config vpn pool on asa 5510.

Does someone kown how to do?

Everyone's tags (2)
1 REPLY
Super Bronze

Re: How to config vpn pool on asa5510 in a Multi-hop routing la

Hi,

The VPN Pool could be pretty much any network/subnet.

The amount of routing hops on the LAN network doesnt really matter. The ASA should have a route for the LAN network so it can forward the VPN user traffic there. The return traffic from the LAN to the VPN user should be forwarded with the default route of the network devices. If your default route isnt pointing to this ASA then you naturally need to add a route for the VPN Pool on your LAN devices.

Though I am not sure I have understood your question completely.

- Jouni

170
Views
0
Helpful
1
Replies
CreatePlease to create content