How to configure Cisco ASA-SSM-CSC-10 module access to internet
I want to configure ASA-SSM-CSC-10 module on Cisco ASA5510 can access to internet. Do you have guide to do it?
Below is the information of ASA-SSM-CSC-10 module and ASA5510 has Version 8.0(5)
ASA5510# sh module 1 details Getting details from the Service Module, please wait... ASA 5500 Series Content Security Services Module-10 Model: ASA-SSM-CSC-10 Hardware version: 1.0 Serial Number: JAF1229APDM Firmware version: 1.0(11)4 Software version: CSC SSM 6.6.1125.0.1145 MAC Address Range: 001d.70df.2f49 to 001d.70df.2f49 App. name: CSC SSM App. Status: Up App. Status Desc: CSC SSM scan services are available App. version: 6.6.1125.0.1145 Data plane Status: Up Status: Up HTTP Service: Up HTTPS Service: Up Mail Service: Up FTP Service: Up Activated: Yes Mgmt IP addr: 10.10.1.241 Mgmt web port: 8443 Peer IP addr: <not enabled>
Link above that you provided me seem not meet my issue. could you please give me some configuration like management IP Address on both ASA and CSC-SSM or need to use NAT or use access-list to allow csc module can access internet?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...