Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure CSD for testing?

Hi all,

I would like to implement Cisco Secure Desktop in our WebVPN setup, but I need a way to configure and test it without effecting our existing WebVPN users.

It seems to me that if I create a Windows Location with a criteria that *only* my test machine matches, all other users will fail. If I enable all features "when location matching fails," existing users won't see a difference.

Is this correct? Also, with this setup, will the VPN still attempt to push out the CSD software when users connect?

Any advice is appreciated.

Thanks,

- Steve

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: How to configure CSD for testing?

Yes, Existing users won't see a difference "When Location matching fails" . This option "when location matching fails" helps Windows clients use the VPN to browse the web as a minimal connection option, if the client PC does not match any of the configured locations criteria.

1 REPLY
Silver

Re: How to configure CSD for testing?

Yes, Existing users won't see a difference "When Location matching fails" . This option "when location matching fails" helps Windows clients use the VPN to browse the web as a minimal connection option, if the client PC does not match any of the configured locations criteria.

133
Views
0
Helpful
1
Replies
CreatePlease login to create content