Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to configure VPN client 4x to VPN 3030 using ipsec over tcp and Microso

Could someone here verify the configuration form me?

Setup:

VPN 4.01 client -> Linksys NAT router -> internet <- PIX 520 <- VPN 3030 (PIX DMZ) <- LAN

Configuration:

1. Permite inbound traffic on TCP port 10000 on PIX for VPN 3030

2. Enable ipsec over tcp on VPN 3030 in global configuration.

3. create vpn client profile for ipsec over tcp connection :

a. import microsoft root & personal certificates into cisco vpn client.

b. General tab: enable transparent tunneling, and select ipsec over tcp (NAT/PAT) option.

c. Authenication tab: select certificate

option.

1 REPLY
Bronze

Re: How to configure VPN client 4x to VPN 3030 using ipsec over

You can cross check your configurations with the sample configurations on the IPSec and PIX support pages. They can be accessed at:

PIX:http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Hardware:PIX&viewall=true

IPSEC:http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Internetworking:IPSec&s=Implementation_and_Configuration

241
Views
0
Helpful
1
Replies
CreatePlease to create content