I would like to ask about ASA 5505.So,i want to configure VPN L2L on ASA 5505 but i don't how to configure it?i met the problem: it has Vlan1 on interface. by the way on ASA 5510 i can config it because it don't has interface Vlan1.
Could you let me know how can i solve this problem?
David, since you are not giving to much info other than one fw has vlan1 and other doesn't is hard to help. Basically what you are looking for is how to implement L2L vpn between two sites, one side being ASA5505 and other ASA5510. Here is a link with config examples between two firewalls, this applies for ASA as well.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...