Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to configure webvpn on the ASA5510

Hi Forum,

I am trying to setup the webvpn on my ASA5510 7.0. I can see the welcome screen when i try to connect to the ASA but nothing beyond that. What could have I done wrong, Is there any sample configurations I can follow? How do I configure the port redirection if I want to remotely telnet to the router?

Append is my config:

thanks much,

ip local pool webvpnpool 192.168.70.30-192.168.70.254 mask 255.255.255.0

url-list KSOWebsite "KSO E-solutions" http://172.16.160.29/default.htm

url-list KSOWebsite "Komag Email Access" https://mail.komag.com.my

url-list KSO-Servers "KSVR09" cifs://172.16.160.27

url-list KSO-Servers "KSVR07" cifs://172.16.160.29

aaa-server kso-radius protocol radius

aaa-server kso-radius host 172.16.160.29

webvpn

group-policy KSOwebvpngrp internal

group-policy KSOwebvpngrp attributes

vpn-tunnel-protocol IPSec webvpn

webvpn

functions url-entry file-access file-entry file-browsing mapi port-forward

tunnel-group KSOwebvpntunnelgrp type ipsec-ra

tunnel-group KSOwebvpntunnelgrp general-attributes

address-pool webvpnpool

authentication-server-group kso-radius

accounting-server-group kso-radius

default-group-policy KSOwebvpngrp

webvpn

enable outside

nbns-server 172.16.160.31 master timeout 2 retry 2

nbns-server 172.16.160.33 timeout 2 retry 2

accounting-server-group kso-radius

authentication-server-group kso-radius

imap4s

enable outside

server 172.16.160.33

authentication-server-group kso-radius

accounting-server-group kso-radius

default-group-policy KSOwebvpngrp

authentication aaa

pop3s

enable outside

server 172.16.160.33

authentication-server-group kso-radius

accounting-server-group kso-radius

default-group-policy KSOwebvpngrp

authentication aaa

smtps

enable outside

server 172.16.160.33

authentication-server-group kso-radius

accounting-server-group kso-radius

default-group-policy KSOwebvpngrp

3 REPLIES

Re: How to configure webvpn on the ASA5510

Hi .. make sure you disable ASDM access to the outside interface of teh ASA ..

The below link provides instruction that you need to follow .

http://www.cisco.com/en/US/partner/products/ps6120/products_configuration_guide_chapter09186a0080334071.html

I hop eit helps .. please rate it if it does !!!

New Member

Re: How to configure webvpn on the ASA5510

Hi Fernando,

Thanks for your reply. I have already disable the ASDM on the external interface. however, i have no right to access the link, is there any other link that you can provide for me?

thanks,

Cisco Employee

Re: How to configure webvpn on the ASA5510

Paul,

The link posted by Fernando is accessible only if you have cisco partner access.

You should have access to the below link, which is the same as the one posted by Fernando.

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_70/config/webvpn.htm

Regards,

Arul

1260
Views
0
Helpful
3
Replies
CreatePlease to create content