Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to NAT 192.168.10.0/24 to 192.168.11.0/29 segment

Hi,

How to NAT 192.168.10.0/24 to 192.168.11.0/29 segment for us to be able to use the VPN of 192.168.11.0/29?

Regards,

Darwin

1 REPLY

Re: how to NAT 192.168.10.0/24 to 192.168.11.0/29 segment

Looks like 192.168.11.1 is your VPN gateway.  In this case you will need to NAT 192.168.10.0/24 to the address of your outside interface (traffic from 192.168.10.0/24 --> 192.168.11.1 will appear to be sourced from 192.168.11.2 here.

!----Define the gobal address (this will be, in this case, the existing address on the outside interface, which is perfectly doable any address in the 192.168.11.0/29 range (besides .1)will do , though)---

global (outside) 1 192.168.11.2

!----Define the traffic that will NAT to the global address when passing through the outside interface to the VPN gateway (192.168.10.0/24 --> 192.168.11.1)

access-list nat-to-vpn extemded permit ip 192.168.10.0 255.255.255.0 host 192.168.11.1

!---Apply interesting traffic to NAT

nat (inside) 1 access-list nat-to-vpn

Please rate helpful posts.

806
Views
0
Helpful
1
Replies
CreatePlease login to create content