Re: how to route traffic from VPDN client(PPTP) to EZVPN server
I have got EZVPN between branch and central. When I connected to branch router over L2TP(router in the branch is the server L2TPoverIPSec) I can't ping any host behind server EZVPN. The ping should be routed from Virtual-Access(L2TP) to EZVPN but it is not working. Both L2TPoIPSec and EZVPN are terminating on the same physical interface(public address). If I try ping from LAN branch to LAN central over EZVPN ping is working.When I changed EZVPN to native IPSec (static crypto map) it's not working too.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...