Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to set bandwidth on pix firewall interface

can you please guide me through this. as i have not find any command for setting the bandwidth for firewall interface

3 REPLIES

Re: how to set bandwidth on pix firewall interface

What are you trying to do?

There is no Bandwdith setting on the PIX ehternet/Gigibit interfaces, just speed and duplex.

HTH>

Re: how to set bandwidth on pix firewall interface

Do you mean to set the speed? There is a 'speed' command in interface config mode.

You can also do limited QOS, what do you want exactly?

Regards

Farrukh

Re: how to set bandwidth on pix firewall interface

you can use the bandwidth managment(rate limit) using qos. but you cannot directly setup a bandwidth statement on the interface. see this link

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

430
Views
4
Helpful
3
Replies