Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to Setup Cisco 1841 as VPN Server for site to site VPN with watch gaurd

I want to set up a cisco 1841 as VPN server to establish IP sec VPN ( site to site) from a watch gaurd firewall,

I have looked through some config examples from cisco, but can not seem to get much.

Can you please send me sample config steps i need o perform on the cisco router ? and what credentials need to be given out to watch gaurd to establish a permanent VPN ?

urgent assistance will be greatly appriciated.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to Setup Cisco 1841 as VPN Server for site to site VPN w

The cisco router will be configured as a normal IPSEC lan to lan tunnel, there is no difference when configuring it to create a tunnel to a watchguard/sonicwall or whatever peer it will use, you can use this link as guide:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml

If you have any trouble let me know.

2 REPLIES

Re: How to Setup Cisco 1841 as VPN Server for site to site VPN w

The cisco router will be configured as a normal IPSEC lan to lan tunnel, there is no difference when configuring it to create a tunnel to a watchguard/sonicwall or whatever peer it will use, you can use this link as guide:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml

If you have any trouble let me know.

New Member

Re: How to Setup Cisco 1841 as VPN Server for site to site VPN w

Many Thanks,

I should be fine now.

265
Views
0
Helpful
2
Replies
CreatePlease to create content