Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IDSM-UPGRADE

Hi, i am upgrading IDSM2 from 5.x to 6.x the problem i had is that when i follow the document which is :http://www.cisco.com/en/US/docs/security/ips/6.0/configuration/guide/cli/cliImage.html#wp1031426,

I had a problem when i issue the command :ftp://user@ftp_server_IP_address/directory_path/WS-SVC-IDSM2-K9-sys-1.1-a-6.0-0.190-E0.

1.bin.gz the error was saying that the file is not .pkg file, when i again refer to the document i fond that i have to boot up the IDSM to the maintenance partition first theN issue the ftp command, my problem

is how can i access the maintenance partition .and is there any other way to upgrade my IDSM

I tried to log in through the consol so i can press CTRL + x or any other key but the boot through the consol dosn`t show any boot progress

i also tried throught the GUI but i think it only accept the update of the service pack and signture

please i need a help

1 REPLY
Silver

Re: IDSM-UPGRADE

Have a look at the following document.

Upgrading the Intrusion Detection System Module

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00800a3d42.shtml

101
Views
0
Helpful
1
Replies