Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IKE Error when using VPN client

Can any tell me what might be causing the following error when i connect to my ASA using a CISCO VPN client.

3 Feb 26 2009 15:16:18 713042 IKE Initiator unable to find policy: Intf INSIDE, Src: x.x.x.x, Dst: x.x.x.x

11 REPLIES

Re: IKE Error when using VPN client

This happens when traffic from inside to outside is trying to match a vpn connection that does not have a defined policy, usually when the dynamic crypto map is defined before the statics or if there is a match address on the dynamic map. Can you post your config?

Anonymous
N/A

Re: IKE Error when using VPN client

Anonymous
N/A

Re: IKE Error when using VPN client

Anonymous
N/A

Re: IKE Error when using VPN client

Anonymous
N/A

Re: IKE Error when using VPN client

Cisco Employee

Re: IKE Error when using VPN client

Please check if you have the "crypto isakmp enable INSIDE" command on the ASA, as you seem to be connecting to the INSIDE interface.

Anonymous
N/A

Re: IKE Error when using VPN client

Anonymous
N/A

Re: IKE Error when using VPN client

Anonymous
N/A

Re: IKE Error when using VPN client

Anonymous
N/A

Re: IKE Error when using VPN client

Anonymous
N/A

Re: IKE Error when using VPN client

187
Views
0
Helpful
11
Replies
CreatePlease to create content