Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

IKE Initiator unable to find policy problem

I have a PIX that suddenly does not want to send traffic to remote users anymore. VPN connection is established as it should, but no traffic gets out, and the only thing I can find in the logging is "IKE Initiator unable to find policy". I verified the crypto maps and the ACLs and they all seem fine. Any ideas?

Peter

3 REPLIES
Bronze

Re: IKE Initiator unable to find policy problem

You'll need to post your configuration and any applicable debug messages

debug crypto ipsec 7

debug crypto isakmp 7

New Member

Re: IKE Initiator unable to find policy problem

Hi Peter

Could you solve the issue in the meantime? I'm having the exact same problem for a VPN site-to-site peer with code 8.2(1).

Regards

Toni

New Member

Re: IKE Initiator unable to find policy problem

No, I think I redid the config from scratch at both ends and got it to work, but never figured out why it suddenly stopped

working.

844
Views
0
Helpful
3
Replies
CreatePlease to create content