Re: Initiation VPN tunnel from the static to dynamic side
ASA would not support dynamic VPN like DMVPN. If your Linksys device supports, you can configure EZVPN between ASA and the Linksys device. This way you can have a static IP address on the ASA and a dynamic ip addr on Linksys device.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...