Interface communication within the vpn concentrator
We have made a LAN to LAN ipsec tunnel between 2 locations over the WAN, and the details are attached.
The tunnel is estalished; one sode i have a cisco VPN concentrator 3000 and the remote location i have a Linux server which is acting like a concentrator.
on the concentrator side when i try to trace the remote location ie. the Linux side lan iam able to reach the vpn concentrator but only the inside interface and then the traffic dies it does not land on the LAN segment.
If somebody can suggest something on this that would a great help.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...