04-28-2016 10:56 AM
Hello, Would like some help here, I have configured easy vpn on router to connect to head office from branch office. Branch office dont have static public IP so need to configure easy vpn.
VPN tunnel comes up and can access the head office network but looses the internet connection.
If I use cisco VPN client with the same group and key details I can connect to head office and also internet stays connected. please see the attached branch office router config
04-29-2016 12:56 AM
Hi Hasrat,
In the NAT
Are we NATTING the VPN traffic as well ?
If not can we deny the traffic going to the VPN ?
If possible can you share the config of the EZVPN server as well ?
Regards,
Aditya
Please rate helpful posts.
04-29-2016 02:08 AM
Thanks, please see the attached configs, I did deny the VPN traffic but still the same issue, as I said using vpn client work all ok not with router to router, must be very minor thing I am missing here
I have change the inside LAN ip address on the branch config.
Head office inside lan - 10.10.10.0/24
Remote vpn pool - 192.168.11.0/24
Branch office inside LAN - 10.10.13.0/24
07-25-2016 03:26 AM
Issue resolved by adding NAT ALLOW command in easy vpn
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide