Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Internet gateway for a site to site VPN branch office

My main office A has 2811 as internet and VPN gateway while I have branch office B as remote site with ASA5505. They built a VPN between these two offices and worked well. Can I put force the internet traffic from office B to office A and then goto internet with office A 2811?

1 REPLY

Re: Internet gateway for a site to site VPN branch office

Yes - one solution

1) A Dynamic routing protocol

2) A GRE tunnel (to encapsulation dynamic routing)

3) Specific static routes for tunnel end points

4) Specific NAT

Once you have the above from site to site, you can inject a default route into the routing protocol, and the routers will take care of the rest.

Or you can try and use DMVPN and static routes.

HTH>

270
Views
0
Helpful
1
Replies