Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Internet through VPN problem.

Hello. I have a problem configuring a vp n client to work with internet through the vpn. I have made the following config (to couple it with a ZBF config) and when i connect with the vpn client i can only browse https websites (port 443). Port 80 seems to work, it NAT's but i always get a pae cannot be displayed. Any help will be great. Thanks a lot,

!

!

crypto isakmp policy 1

encr 3des

authentication pre-share

group 2

crypto isakmp key XXXXX address 0.0.0.0 0.0.0.0

crypto isakmp keepalive 10

!

crypto isakmp client configuration group cisco

key XXXXX

dns 172.16.10.1

pool VPN-Pool

netmask 255.255.255.248

crypto isakmp profile VTI

   match identity group cisco

   isakmp authorization list default

   client configuration address respond

   virtual-template 1

!

!

crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

!

crypto ipsec profile vti

set transform-set ESP-3DES-SHA

set isakmp-profile VTI

!

!

!

!

interface Virtual-Template1 type tunnel

ip unnumbered Loopback0

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1412

tunnel source Dialer0

tunnel mode ipsec ipv4

tunnel protection ipsec profile vti

!

!

!

!

337
Views
0
Helpful
0
Replies
CreatePlease to create content