Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS SSL VPN Issues

Hi Experts.

I cannot get SSL VPN tunnel mode to work on a Cisco1801 Router. I can get the URL side working fine, but when i try and set-up the Tunnel mode using SDM. I get the following error message when i try to connect.

An error has been found in the VPN server certificate.

Certificate received is signed by an untrusted authority.

I then have the option to install the certificate. This process seems to work but i then get the following error.

The SSL VPN HTTP responce code received form the gateway indicates an error, contact your network administartor.

Am i doing something wrong with regards to the certificate?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: IOS SSL VPN Issues

I'm sorry, just got a chance to skim through your configs. It seems you are using a VPN pool which is not directly connected to the router. You either need to use a directly connected pool or create a loopback in the same subnet.

Also post output of

debug webvpn tunnel

debug webvpn auth

debug webvpn svc

Regards

Farrukh

3 REPLIES
New Member

Re: IOS SSL VPN Issues

Config, Show ver and debug attached.

Re: IOS SSL VPN Issues

I'm sorry, just got a chance to skim through your configs. It seems you are using a VPN pool which is not directly connected to the router. You either need to use a directly connected pool or create a loopback in the same subnet.

Also post output of

debug webvpn tunnel

debug webvpn auth

debug webvpn svc

Regards

Farrukh

New Member

Re: IOS SSL VPN Issues

The Pool was the problem, thanks a lot for you help all working now...

132
Views
5
Helpful
3
Replies