In the attachment you can find the picture of my network topology.
I have two ASA5505 and L2L IPSec tunnel between them. On the left, there is a server with 10.1.1.254 ip address. I want hosts on the right to access it via 10.1.2.254 address. I mean, users would think that the server is in their network but it will be not - all the packets destined for that address would be passed to 10.1.1.254. How to achive that?
Hello, i solved this problem in my network environment when create manual routes statics between the gateway of server and gateway of other network that you want connect, ex: on server 10.1.1.254 in prompt command type: route add 10.1.2.0 mask X.X.X.X 10.1.1.1 -p
This will force your server to see other network permanently. Try it.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...