we have pix 535 running with 712-42.bin image.before activating security context lecensing key all the interfaces are pinging.after activating the licensing key when we give the ip it is taking .in running conf also ip address of interface is showing.but when checking the interface status using show interface ethernet 0,it is showing that interface is up and line protocol is up,ip address is unassigned.and we are unable to ping that interface also.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...