cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
864
Views
0
Helpful
1
Replies

IP inspect fragment max command and its effect on SSL Anyconnect

Richard Ortiz
Level 1
Level 1

I have a customer with a Cisco 3825 functioning as a firewall and "IP inspect fragment max on 256 timeout 1" is configured on the inbound. 

Can or will this command have any adverse affects on Cisco SSL Anyconnect client communications?

1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

Don't believe that the inspection for fragments will particularly affect AnyConnect traffic. It will be inspecting for a maximum of 256 fragments before it starts to reassemble the packet for inspection. It will have affect on all traffic through the router, but not specifically to AnyConnect traffic.

Hope that helps.

View solution in original post

1 Reply 1

Jennifer Halim
Cisco Employee
Cisco Employee

Don't believe that the inspection for fragments will particularly affect AnyConnect traffic. It will be inspecting for a maximum of 256 fragments before it starts to reassemble the packet for inspection. It will have affect on all traffic through the router, but not specifically to AnyConnect traffic.

Hope that helps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: