Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

ip tcp adjust-mss & mtu

folks

i have a vpn between two hardware serial encryptors and i'm having a few active directory issues which i suspect are mtu related, i.e. group policy donesn't always apply

i'm looking some advice on using the ip tcp adjust-mss command and and mtu command

can anyone recommend a guide to me please?

i'm attaching a topology in the hope it will jog someone's memory and i can add some relevant config if it helps

thanks to anyone taking the time to read this or reply

3 REPLIES
New Member

Re: ip tcp adjust-mss & mtu

Mulholland,

What would lead you to believe that this issue is TCP-MSS or MTU related? In

my experience if it were related to that, then group policy would not apply

consistently and there would be a lot more issues than only GPO's not

applying.

Here is a pretty straight forward guide to finding the MTU you should be

using. http://www.howtonetworking.com/VPN/mtu4.htm

<>Also, rather than changing the

MTU or MSS on your entire network, you may try adjusting the window size or

MTU on one or two client devices to see if that alleviates any of the issues

you are seeing--and be sure thats it before you change those settings on a

router...

Additionally, if you can run a packet capture on a device that is having

connectivity issues and you see a huge number of duplicate acks--or tcp

packets with the same sequence number then that would lean towards an MTU

issue. Wireshark has pretty good built in analysis for this type of thing.

I hope this helps. Let us know how it works out.

On Sat, Jan 30, 2010 at 3:51 PM, mulhollandm <

New Member

Re: ip tcp adjust-mss & mtu

james

i suspect its mtu size as we already patched one of the remote hosts with a MS patch and this resolved the issue but i'll have different users drifting in & out of this lan so i need a solution that will affect all users

i configured the tcp mss command some time ago and it sorted out other mtu issues but i'm led to believe the AD sends a number of large packets for machine joining a domain but i need to read up a bit more on this

thanks

New Member

Re: ip tcp adjust-mss & mtu

HI This is Cisco's Guide for TCP adjust-mss & mtu on IOS Router:

http://www.cisco.com/en/US/docs/ios/12_2sb/12_2sba/feature/guide/sb_admss.html

Thanks,

Pradhuman

1042
Views
0
Helpful
3
Replies
CreatePlease to create content