03-23-2012 03:05 PM - edited 02-21-2020 05:58 PM
03-24-2012 08:58 AM
Have you looked at the apple website?
Sent from Cisco Technical Support iPad App
03-24-2012 11:25 AM
Yes I found the app but can not connect
03-24-2012 09:08 PM
The iPad has a IPSec option, select "VPN" at the "General Settings". You will need the VPN credentials like the Group Name and pre shared key.
Sent from Cisco Technical Support iPad App
03-24-2012 09:11 PM
For Juniper SA you will need the Junos Pulse.
Sent from Cisco Technical Support iPad App
03-25-2012 12:26 AM
03-25-2012 07:57 AM
I don't see any crypto map associated with your outside interface (or even defined in the config). Remote access VPN does not appear to be properly setup on the router, much less for any iPad access.
Have you followed one of the many how-to guides out there? e.g., Cisco's (the remote access VPN bit of that tech note) or some 3rd party guide. Another 3rd party guide.
03-25-2012 09:52 AM
I've geconfigureert connection but can not do with the remote router ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: